Digital booths
Pair a Sony camera for PC Remote over Wi-Fi
Use the camera’s documented network flow and verify its destination.
A Sony camera can send tethered captures through different routes, but a Wi-Fi connection introduces pairing and network-state checks. Complete those checks before putting the camera in a guest-facing booth.
Prepare the computer route
Open the camera’s PC Remote function settings and choose the computer connection method supported by the body. Follow its on-screen pairing or authentication steps and make sure the camera and computer are on the intended network; use the model-specific Help Guide because labels can vary.
Evidence: Official camera help
Set the file destination
Choose where files should be saved and whether the camera keeps a copy if that option is available. Sony warns that connected-phone states can interfere with some PC Remote configurations; disconnect other camera companions if the body’s guide identifies a conflict.
Evidence: Official camera help
Test a full cycle
Capture one frame, wait for transfer, and open the file on the computer. Then repeat once after disconnecting and reconnecting the chosen network path. If the camera loses pairing, record the model and connection mode; do not substitute instructions from a different generation without checking its guide.
Evidence: Official camera help
Sources & further reading
Sources for the specific facts and product descriptions above. Our worked examples, interpretations and practical suggestions are original editorial guidance.
- Sony Help Guide — PC Remote FunctionOfficial camera help